Finally I achieve to connect my SP3 to Internet through Adhoc Wifi tethering with my Galaxy S4 (using Android Barnacle App)
The solution is not perfect because I had to buy a USB Wifi Dongle , (NETGEAR G54/150 Wifi USB Micro Adapter) but it is very cheap, 16€ (at the FNAC shop) and very small (16x7x7mm).
I used this method https://social.technet.microsoft.co...46fa/windows-81-connecting-to-ad-hoc-networks
But with the Inboard MARVELL AVASTAR Wifi card it was impossible to connect
when I use only the inboard Marvell card and I type
>netsh wlan show networks
I can see my ad-hoc network but when I type
>netsh wlan set profileparameter <MySSID> connectiontype=ibss
I always have the message "Can't find <MySSID> on interfaces":-(
When I do the same operation with the NETGEAR Wifi Dongle it works!!!!
Hope this helps,... and avoid you to waste your time trying to solve things that were working perfectly on previous Windows Versions (until 7)
The solution is not perfect because I had to buy a USB Wifi Dongle , (NETGEAR G54/150 Wifi USB Micro Adapter) but it is very cheap, 16€ (at the FNAC shop) and very small (16x7x7mm).
I used this method https://social.technet.microsoft.co...46fa/windows-81-connecting-to-ad-hoc-networks
But with the Inboard MARVELL AVASTAR Wifi card it was impossible to connect
when I use only the inboard Marvell card and I type
>netsh wlan show networks
I can see my ad-hoc network but when I type
>netsh wlan set profileparameter <MySSID> connectiontype=ibss
I always have the message "Can't find <MySSID> on interfaces":-(
When I do the same operation with the NETGEAR Wifi Dongle it works!!!!
Hope this helps,... and avoid you to waste your time trying to solve things that were working perfectly on previous Windows Versions (until 7)