rafikiphoto
New Member
I have a RavPower battery pack and was wondering if there is any way I can charge my SP3 battery from it.
Charge my SP3 from a battery pack?
- Thread starter rafikiphoto
- Start date
Wayne Orwig
Active Member
I use a battery pack often. It is a PowerAdd 32000. 12 volt 4.5 amp output. (i'm not sure what current is needed) I got a cable off of Amazon or Ebay for a few bucks. The battery is close to 120 watt/hour.
A few hours ago, my SP3 was at about 50%. It is now at 100% and the external pack is close to 50%. (charging a phone too) I think the external pack was around 70% when the SP3 hit 100%.
The SP3 takes roughly 10% per hour. The pack has roughly two times the SP3 capacity. If I am thinking that through correctly.
Great when traveling. But still hard to beat an AC adapter.
A few hours ago, my SP3 was at about 50%. It is now at 100% and the external pack is close to 50%. (charging a phone too) I think the external pack was around 70% when the SP3 hit 100%.
The SP3 takes roughly 10% per hour. The pack has roughly two times the SP3 capacity. If I am thinking that through correctly.
Great when traveling. But still hard to beat an AC adapter.
Last edited:
OP
rafikiphoto
New Member
Thanks, that's good to hear. Can you tell me what cable I need to feed the SP3?
