Search results

  1. Wayne Orwig

    Replacement cost

    When I was looking at replacing my SB, the online price showed close to $600 USD.
  2. Wayne Orwig

    Will not start even after hard reboot steps

    Do you have a store nearby that you can take it to?
  3. Wayne Orwig

    Type Cover Driver Missing and not working

    Have you tried a different cover to see if it is hardware?
  4. Wayne Orwig

    What is an RF Isolator?

    In this case, I suspect the RF isolator is just some plastic or foam. The point of it is to simple keep the antenna away from the metal, which would detune the antenna, or reflect or absorb the RF energy. If there is still plastic/foam/tape keeping the antenna in the same general area, an it is...
  5. Wayne Orwig

    plastic top edge to SP3

    I would imagine that you need to unglue the display panel. The cameras and maybe even the wifi antennas can then be removed from the plastic. It is easy to imagine that the plastic piece is screwed to the metal back. Not easy I'm sure.
  6. Wayne Orwig

    Surface Book Advice

    I still use an original Surface Pro 1 charger from ??? years ago. My original Surface Book 1 charger from over 2 years ago used daily. And a Surface Pro 3 that is over a year old used daily. Never heard of a charger problem.
  7. Wayne Orwig

    SB2 Windows 10 issues

    run something like TreeSize, and capture a screen shut. Wait a day and run it again to see what has grown.
  8. Wayne Orwig

    The unit is abnormally hot

    Task manager will likely show you what program is loading the processor.
  9. Wayne Orwig

    SP3 new screen

    When I did my SP1, just buying the screen was everything, the touch portion, and the pen portion. It was all in one. I can not say for certain that Ebay listing is the same.
  10. Wayne Orwig

    Boot problems

    The boot settings are probably set to boot from USB. Go into the boot settings and change the boot order.
  11. Wayne Orwig

    SP3 new screen

    On a SP1, I got a kit to help me. iOpener Toolkit You apply heat to the glue that holds the display on. It takes a lot of time and care to loosen the glue. It is VERY easy to damage a cable so you need to go slowly. In the end, I damaged a connector on the motherboard, so I had issues with the...
  12. Wayne Orwig

    Must-have SB2 acessories?

    I think micro still SD tops out at 256. 128 prices have gotten down a good bit. The 200 and 256 is still a bit pricey.
  13. Wayne Orwig

    Unable to remove "tablet"..."low batt

    I have "Battery X" from the store on my SP3 and my SB. But I do not recall if it has info on both batteries in the SB. (I am not near it right now) But there are a couple of non-store apps that are actually better. BatteryInfoView - View battery information on laptops / netbooks
  14. Wayne Orwig

    Unable to remove "tablet"..."low batt

    Have you tried one of the battery monitoring apps to see what it shows about the tablet battery capacity?
  15. Wayne Orwig

    Unable to remove "tablet"..."low batt

    I would first suspect a poor connection. I would 'wiggle' the keyboard to tablet connection as much as I could and tried to get it to connect better, and hope is charged.
  16. Wayne Orwig

    Musician: help w i7 SPro3 (heat, cases, throttling)

    Have you tried to select 'eject' on the menu for that drive. That should un-mount it and accomplish the same thing. Not the best solution, but maybe better than physically pulling it. I'm not sure how to mount it back afterwards though. Other than a reboot or physical reconnect. :)
  17. Wayne Orwig

    Solved Task bar not on top

    Are you in TABLET mode, with the AUTOMATICALLY HIDE TASKBAR setting on?
  18. Wayne Orwig

    Broken screen

    Look for a bulge in the case or screen. If the battery is starting to fail, it may swell up. (particularly while being charged) That may break the screen. If so, you need to replace the screen AND the battery. Do NOT continue to use a swollen battery. I suspect you can find someone that can...
  19. Wayne Orwig

    How to recognize an original screen for surface pro 3

    I doubt you can get the part from Microsoft. They would only want to deal in a refurbished unit, not individual components. If you want a component, like an LCD screen, you are going to have to get it from an alternate source. Have them show you the old and new part numbers, and get some sort...
Back
Top